Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
9. Brake system
10. Suspension bracket and steering
10.1. Specifications
10.2. Assessment of the general condition of components of a suspension bracket and car steering
10.3. Check of a condition and replacement of spherical support of a forward suspension bracket
10.4. Check of a condition of steering drafts
10.5. Removal and installation of the cross-section lever of a forward suspension bracket
10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
10.7. Removal, check of a condition and installation of screw springs and rack-mount assemblies of a forward suspension bracket
10.8. Removal and installation of stupichny assembly and rotary fist
10.9. Removal, check of a condition and installation of the forward stabilizer of cross-section stability
10.10. Replacement of stupichny bearings
10.11. Check of a condition of shock-absorbers and springs of a back suspension bracket
10.12. Removal and installation of components and assembly of a back suspension bracket
10.13. Removal, check of a condition and installation of levers of a back suspension bracket
10.14. Removal, check of a condition and installation of screw springs of a back suspension bracket
10.15. Removal and installation of shock-absorbers of a back suspension bracket
10.16. Removal and installation of the back stabilizer of cross-section stability
10.17. Removal, check of a condition and installation of a cross-section jet bar of a back suspension bracket
10.18. Pumping of a hydraulic path of a steering drive
10.19. Checks and adjustments of a steering wheel
10.20. Check of effort of resistance to sliding of a lath of the steering mechanism
10.21. Adjustment of a torque of a provorachivaniye of a leading gear wheel of the steering mechanism
10.22. Check of hydraulic pressure of GUR
10.23. Adjustment of effort of a tension of a belt of a drive of the steering pump
10.24. Removal and installation of reduktorny assembly
10.25. Removal and installation of assembly of the steering mechanism
10.26. Removal and installation of the steering pump
10.27. Removal and installation of a steering wheel
10.28. Removal and installation of assembly of the combined podrulevy switches
10.29. Removal and installation of the lock of ignition / blocking of a steering column
10.30. Removal, check of a condition and installation of a steering column
10.31. Corners of installation of forward wheels
11. Body
12. Electric equipment
 








8099f600






10-12-snyatie-i-ustanovka-komponentov-i-sborki-zadnejj-podveski.html

10.12. Removal and installation of components and assembly of a back suspension bracket

The general design of a back suspension bracket — cм. illustration Design of a back suspension bracket.


Details of installation of elements of a back suspension bracket on the car


 PERFORMANCE ORDER

  1. Before starting an otpuskaniye of fixture of components, prop up assembly of the back bridge by a telezhechny jack, having enclosed on its head the wooden block.
  2. Having hung out a suspension bracket, disconnect from brake boards hydraulic brake lines and cables of a drive of the parking brake.

In order to avoid a rounding off шлицов cap shtutserny nuts use a special cap natural a cutting head. Remove from a suspension bracket wheel ABS sensors and take them aside together with the connected electroconducting.

  1. Release fixture of collars of fastening of a bar of the back stabilizer of cross-section stability to a body.
  2. Give fixture and disconnect from the car bottom the top and bottom levers of a suspension bracket.
  3. Disconnect the driveshaft from the main transfer of the back bridge.
  4. Give nuts of fastening of the top support of back shock-absorbers.
  5. In case of need remove from assembly components needing replacement.
  6. Installation is made upside-down.

The final tightening of fixture of the elements equipped with rubber plugs is made in the unloaded condition with the wheels lowered on the earth.



«on page back
10.11. Check of a condition of shock-absorbers and springs of a back suspension bracket
on the following page»
10.13. Removal, check of a condition and installation of levers of a back suspension bracket