Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of a transfer case
8.2.3. Removal and installation of the driving electromotor of the actuation mechanism of a transfer case
8.2.4. Replacement of the oil filter of a transfer case
8.2.5. Replacement of epiploons of a target shaft of a transfer case
8.2.6. Replacement of an epiploon of a rod of switching of a transfer case
8.3. Differentials, power shafts / semi-axis
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 








8099f600 лечение спины






8-2-5-zamena-salnikov-vykhodnogo-vala-razdatochnojj-korobki.html

8.2.5. Replacement of epiploons of a target shaft of a transfer case

 PERFORMANCE ORDER

  1. Merge from a transfer case lubricant liquid.
  2. Remove forward section of system of production of the fulfilled gases and the thermofilter.
  3. Remove the forward driveshaft (see. Removal and installation of driveshafts).
  1. By means of a special key release a lock-nut of a connecting flange.

The lock-nut is subject to replacement without fail.

  1. With paint mark the provision of a connecting flange of rather carving pin.
  1. Remove a connecting flange by means of a stripper.
  1. Having used the special adaptation take an epiploon from a forward casing.
  1. Establish a new epiploon, previously having greased its sealing sponges with universal greasing.
  2. Establish a connecting flange.
  1. Tighten a lock-nut of a connecting flange with demanded effort.
  1. Establish the driveshaft.
  2. Installation of the remained components is made as it should be, the return to an order of their dismantle.


Back epiploon

 PERFORMANCE ORDER

  1. Remove the back driveshaft.
  2. Take a back epiploon from a landing nest in the case of a transfer case.
  1. Previously having greased sealing sponges with universal greasing, plant a new epiploon and press it in a nest by means of a cylindrical opravka as which it is possible to use a replaceable face head suitable on the size or a piece of a pipe of the corresponding diameter. The edge of an opravka should rest only against a rigid face surface of an epiploon.
  1. Establish into place the back driveshaft.


«on page back
8.2.4. Replacement of the oil filter of a transfer case
on the following page»
8.2.6. Replacement of an epiploon of a rod of switching of a transfer case