|
2-1-3-distancionnoe-upravlenie-funkcionirovaniem-ehlektroprivoda-aktivatorov-dvernykh-zamkov.html
2.1.3. Remote control by functioning of the electric drive of activators door locks / activation of the anticreeping alarm system
|
|
Before making locking of doors, make sure that did not leave in salon keys! |
For remote control by functioning of door locks and activation of the anticreeping alarm system the special panel executed in the form of a charm is provided.
The remote control (DU) allows to make activation of locks / the alarm system from distance to 10 meters (depending on district conditions).
|
|
Activation of the anticreeping alarm system (PANIC) is not represented possible at left in the ignition lock a key! |
On one car can be used to 4 DU panels. Information concerning acquisition of additional panels always can be received at firm car repair shops Infinitis.
Refusals of operation of the DU panel can be caused by the following reasons:
- The key is in the ignition lock (see below remark in subsection Locking of doors);
- Level of a charge of an element of a food of the panel fell;
- The distance between the panel and the car exceeds 10 meters.
|
|
Do not allow hit on the moisture DU panel!
Do not drop and do not shake the DU panel!
Do not allow long impact on the DU panel of direct sunlight and its heating from above 60°Ñ!
In case of loss of the DU panel it is necessary to make deleting of its identification code in the conditions of firm car repair shop Infiniti! |
Corrected the handling of the device of remote control
Choice of a mode of functioning of elements of the anticreeping alarm system at activation of the uniform lock from the DU panel
The scheme of switching of modes of functioning of elements of the anticreeping alarm system at activation of the uniform lock from the DU panel
|
MODE
(for 2 seconds at the same time to press the LOCK and UNLOCK buttons) |
Order of operation of elements |
Locking of doors |
Unlocking of doors |
|
Mode<Àâàðèéíàÿ ñèãíàëèçàöèÿ + êëàêñîí> Normal mode
|
Lighting devices — triple operation
|
Lighting devices — double operation
|
—
|
|
Normal mode
Mode Alarm system + horn> |
Lighting devices - single operation + a horn - single operation |
Lighting devices - double operation + a horn - single operation
|
Lighting devices — single operation
|
By default the system is established on simultaneous activation of the alarm system and a horn siren, - at a nazhimaniye on the LOCK button of the DU panel lighting devices of the alarm system (including control lamps) should blink twice and once to peep a siren. Nazhimaniye on the UNLOCK button leads to single operation of devices of the alarm system.
At will of the owner of a vehicle the mode of normal functioning of the alarm system, with shutdown of a siren of a horn can be chosen, - the pressing the LOCK button brings to only double operation of the corresponding lighting devices, unlocking of doors is not duplicated in any way. For mode switching at the same time press the LOCK and UNLOCK buttons of the DU panel and hold them pressed during at least 2 seconds. Transition to a normal mode proves to be true triple operation of lighting devices. At return to a mode used by default single operation of lighting devices is accompanied by a short sound signal (see the table the Scheme of switching of modes of functioning of elements of the anticreeping alarm system at activation of the uniform lock from the DU panel).
Locking of doors
Corrected the handling of the DU panel of the uniform lock
|
|
- Take a key from the ignition lock.
|
|
At left in the ignition lock a key blocking of doors will work, however key leaving in situation ASS or ON will lead to refusal of activation of the anticreeping alarm system. |
- Close all doors.
|
|
At open doors locks will work without duplication by lighting devices of the alarm system and a sound signal. |
- Press the button of locking of doors (LOCK) on the DU panel (see an illustration of the Rule of the handling of the DU panel of the uniform lock), - blocking of locks will occur even if any of doors is left open and/or a key will turn in the ignition lock in the situation ON. Serviceability of activation of locks proves to be true operation of the corresponding lighting devices / a sound signal, depending on the chosen mode (see the table the Scheme of switching of modes of functioning of elements of the anticreeping alarm system at activation of the uniform lock from the DU panel).
|
|
The pressing the LOCK button at the blocked locks leads to operation of the corresponding elements of the light / sound alarm system in confirmation of that locking is already made. |
|
|
Unlocking of doors
The short nazhimaniye on the button of unlocking of doors (UNLOCK) on the DU panel (see an illustration of the Rule of the handling of the DU panel of the uniform lock) leads to unlocking of only a driver's door, and also to operation of the corresponding elements of the light / sound alarm system and 30-second activation of internal illumination of salon (at a right choice of position of switches of ceiling lamps).
For unlocking of all doors it is necessary to hold the UNLOCK button of the DU panel pressed during 5 seconds.
|
|
Shutdown of lamps can be made by a way of insertion of a key to the lock of ignition or locking of doors from the DU panel. |
PANIC mode activation
The PANIC mode is intended on an attack case on the owner of a vehicle when it is near the car: keeping of the corresponding button on the DU panel (see an illustration of the Rule of the handling of the DU panel of the uniform lock) pressed within more than 0.5 seconds leads to 30-second activation of head headlights and horn sirens.
For PANIC mode shutdown before the expiration of 30-second term it is necessary to press any of DU panel buttons, or on buttons of activation of the uniform lock of forward doors of the car.
Replacement of an element of a food
|
|
In order to avoid drawing of harm to environment utilization of the used elements of a food should be made according to the requirements established by local authorities! |
As the power supply of the DU panel the lithium battery of the Sanyo CR2025 type is used. Try not to subject the panel to moisture influence, watch, that in the course of element replacement in the panel dirt and/or oil did not get.
|
|
- Having hooked the suitable tool (or a coin), open the top cover of the panel.
- Take from the panel an old element of a food and replace it new, - track polarity observance.
|
|
Try not to touch the printed-circuit board of the panel and battery plugs. |
|
|
- Establish and densely latch a cover.
- For check of serviceability of functioning of the panel several times press on any of buttons its control panels.
|
|
|