Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of a transfer case
8.2.3. Removal and installation of the driving electromotor of the actuation mechanism of a transfer case
8.2.4. Replacement of the oil filter of a transfer case
8.2.5. Replacement of epiploons of a target shaft of a transfer case
8.2.6. Replacement of an epiploon of a rod of switching of a transfer case
8.3. Differentials, power shafts / semi-axis
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 












8-2-3-snyatie-i-ustanovka-privodnogo-ehlektromotora-ispolnitelnogo-ustrojjstva-razdatochnojj-korobki.html

8.2.3. Removal and installation of the driving electromotor of the actuation mechanism of a transfer case

 PERFORMANCE ORDER

  1. Disconnect from a transfer case electroconducting.
  2. Disconnect from the electromotor of the actuation mechanism of a transfer case a tube сапуна.
  1. Turn out fixing bolts and remove the electromotor.

The sealing ring is subject to replacement without fail.


Installation

 PERFORMANCE ORDER

  1. Grease a new sealing ring with technical vaseline or fresh ATF.
  2. Plant a ring and establish the electromotor on the regular place, having tracked correctness of combination of directing ledges.
  3. Tighten fixing bolts with demanded effort (41 — 48 Nanometer).
  4. Connect to the motor a tube сапуна.
  5. Restore initial connection of electroconducting.


«on page back
8.2.2. Removal and installation of a transfer case
on the following page»
8.2.4. Replacement of the oil filter of a transfer case