Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of a transfer case
8.2.3. Removal and installation of the driving electromotor of the actuation mechanism of a transfer case
8.2.4. Replacement of the oil filter of a transfer case
8.2.5. Replacement of epiploons of a target shaft of a transfer case
8.2.6. Replacement of an epiploon of a rod of switching of a transfer case
8.3. Differentials, power shafts / semi-axis
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 








8099f600






8-2-6-zamena-salnika-shtoka-pereklyucheniya-razdatochnojj-korobki.html

8.2.6. Replacement of an epiploon of a rod of switching of a transfer case

 PERFORMANCE ORDER

  1. Remove the forward driveshaft.
  2. Remove a connecting flange (see. Replacement of an epiploon of lengthening of transmission).
  1. Disconnect a control lever from the executive lever of a drive of switching, then remove the executive lever.
  1. Having hooked a suitable screw-driver, remove an epiploon of a rod of switching.
  1. Previously having greased sealing sponges with universal greasing, fill a new epiploon in a landing nest and press it by means of a cylindrical opravka as which it is possible to use a replaceable face head suitable on the size or a piece of a pipe of the corresponding diameter. The edge of an opravka should rest only against a rigid face surface of an epiploon.
  1. Further installation is made as it should be, the return to an order of dismantle of components.


«on page back
8.2.5. Replacement of epiploons of a target shaft of a transfer case
on the following page»
8.3. Differentials, power shafts / semi-axis