Replacement of an epiploon of lengthening of transmission. Infiniti QX4 (since 1996 of release)
8099f600
Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.1.1. General information
8.1.2. AT problem diagnostics - the general information
8.1.3. Electronic and hydraulic control system of 4-step AT
8.1.4. Removal and transmission installation
8.1.5. Replacement of an epiploon of lengthening of transmission
8.1.6. Removal and installation of a cooler of ATF
8.1.7. Removal and installation of klapanny assembly of a hydraulic contour of management of AT
8.1.8. Removal, check of a condition and installation of a driving cable of blocking of switchings
8.1.9. Adjustment of a drive of switching of AT
8.1.10. Adjustment of the sensor switch of provisions of AT / permission of start
8.1.11. Major maintenance of AT
8.2. Transfer case
8.3. Differentials, power shafts / semi-axis
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 






8099f600





8-1-5-zamena-salnika-udlineniya-transmissii.html

8.1.5. Replacement of an epiploon of lengthening of transmission

 PERFORMANCE ORDER

  1. Remove from the car a transfer case (see. Transfer case).
  2. Remove a back epiploon.
  1. Grease sponges new an epiploon of pure ATF, then fill its landing nest and press by means of a cylindrical opravka.

As an opravka the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter can approach.

  1. Further installation is made as it should be, the return to an order of dismantle of components.


«on page back
8.1.4. Removal and transmission installation
on the following page»
8.1.6. Removal and installation of a cooler of ATF