Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
9. Brake system
9.1. Specifications
9.2. System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
9.3. Check of a condition and replacement of brake lines and hoses
9.4. Replacement of blocks of disk brake mechanisms of forward wheels
9.5. Removal and installation of a support of the disk brake mechanism
9.6. Removal and installation of a brake disk
9.7. Replacement of brake boots of drum-type brake mechanisms of back wheels
9.8. Removal and installation of the main brake cylinder (GTTs)
9.9. Removal and installation of assembly of the vacuum amplifier of brakes
9.10. Pumping of brake system
9.11. Adjustment of a drive of the parking brake
9.12. Adjustments of a pedal of a foot brake
9.13. Adjustment of a spring of the valve regulator (LSV) sensitive to loading
9.14. Adjustment of sensors switches of stoplights and темпостата
9.15. Removal and ABS hydromodulator installation
9.16. Removal and G-sensor installation
9.17. Check of serviceability of functioning of wheel ABS sensors
9.18. Check of serviceability of functioning of the G-sensor
9.19. Check of serviceability of functioning of the relay of the driving electromotor of the hydromodulator
9.20. Check of serviceability of functioning of the relay of the electromagnetic valve of the hydraulic ABS modulator
10. Suspension bracket and steering
11. Body
12. Electric equipment
 








8099f600






9-11-regulirovka-privoda-stoyanochnogo-tormoza.html

9.11. Adjustment of a drive of the parking brake

 PERFORMANCE ORDER

  1. Prop up forward wheels protivootkatny boots, release the parking brake, then поддомкратьте a back of the car and establish it on props (see an illustration the Scheme of an institution of props for car fixing in the lifted situation).
  2. Under the car release a regulator of a driving cable of the parking brake.
  3. At the working engine several times squeeze out a pedal of a foot brake before the termination of clicking sounds in back brake mechanisms.
  4. Cock the lever of a drive of the parking brake on 4 — 7 clicks and tighten a regulator of a hummock drive.
  5. Count number of clicks of a ratchet at lever procrastination with effort about 20 kgfs. The nominal rate makes 6 — 8 clicks. Release the parking brake and check freedom of rotation of back wheels.
  6. In case of need make adjustment of the sensor switch of a control lamp of the parking brake.


«on page back
9.10. Pumping of brake system
on the following page»
9.12. Adjustments of a pedal of a foot brake