|
9-4-zamena-kolodok-diskovykh-tormoznykh-mekhanizmov-perednikh-koles.html
9.4. Replacement of blocks of disk brake mechanisms of forward wheels
Design of disk brake mechanisms of forward wheels
Removal
|
|
- To Poddomkratta a car front also establish it on props (see an illustration the Scheme of an institution of props for car fixing in the lifted situation). Remove the corresponding forward wheel. Turn out the bottom fixing bolt and develop a support up on a directing finger.
- Remove holders of blocks and adjusting laying. Remove blocks and measure residual thickness of their frictional slips (the minimum admissible value makes 2.0 mm). In case of need make replacement of blocks.
|
|
Installation
|
|
- Wipe a boot of the piston of the wheel cylinder and directing fingers.
- Wring out the piston and plant in an anchor bracket an internal block.
- Grease contacting to holders of blocks of a surface of a support special brake greasing, then establish an external block and adjusting laying.
- Establish holders of blocks.
- Lower a support in regular situation and establish the bottom fixing bolt.
- Tighten bolts with demanded effort, then several times squeeze out a pedal of a foot brake for a usadka of components of the brake mechanism.
|
|
|
|
