Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.2. Transfer case
8.2.1. General information
8.2.2. Removal and installation of a transfer case
8.2.3. Removal and installation of the driving electromotor of the actuation mechanism of a transfer case
8.2.4. Replacement of the oil filter of a transfer case
8.2.5. Replacement of epiploons of a target shaft of a transfer case
8.2.6. Replacement of an epiploon of a rod of switching of a transfer case
8.3. Differentials, power shafts / semi-axis
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 








8099f600






8-2-4-zamena-maslyanogo-filtra-razdatochnojj-korobki.html

8.2.4. Replacement of the oil filter of a transfer case

 PERFORMANCE ORDER

  1. Turn out fixing bolts and remove the oil filter from a transfer case. Try not to damage filtering element — track uniformity of an otpuskaniye of fixture.
  1. Remove a sealing ring — at installation the ring is subject to replacement without fail.


Installation

 PERFORMANCE ORDER

  1. Grease a new sealing ring with technical vaseline or fresh ATF.
  2. Establish the filter on the regular place and evenly tighten fixing bolts with demanded effort (7 — 9 Nanometers).


«on page back
8.2.3. Removal and installation of the driving electromotor of the actuation mechanism of a transfer case
on the following page»
8.2.5. Replacement of epiploons of a target shaft of a transfer case