|
10-1-specifikacii.html
10.1. Specifications
|
|
Separate parameters are specified also in the text of Head and in case of obligation of their performance are allocated with a bold print. |
|
Characteristic |
Value |
|
Type |
- Forward suspension bracket
|
Completely independent, with MacPherson's racks, the stabilizer of cross-section stability |
|
|
Zhyostky Bridge, jet bar and four levers, stabilizer of cross-section stability |
|
|
The hydrostrengthened reechny transfer, two cross-section steering drafts |
|
Type of liquid of GUR system
|
Dexron II, IIE, III |
|
Volume of hydraulic liquid, l
|
0.9 |
|
Height of a road gleam (cм. illustration Assessment of a condition of screw springs), mm |
|
|
- Forward suspension bracket (Hf)
|
815 |
- Back suspension bracket (Hr)
|
855 |
|
|
- Forward suspension bracket (Hf)
|
815 |
- Back suspension bracket (Hr)
|
846 |
Forward suspension bracket
Spherical support Cм. illustration Assessment люфта wheel landings.
|
Characteristic |
Value |
|
Limiting admissible size axial люфта, mm
|
0.0 |
|
Resistance to a lateral deviation of a shaft of a spherical finger, kgf
|
0.8 — 7.8 |
|
Torque of axial rotation of a shaft of a spherical finger, Nanometer
|
0.5 — 5.0 |
Wheel bearings
|
Characteristic |
Value |
|
Size of a pretightness, kgf
|
0.7 — 2.1 |
Steering
Adjustment of a tension of a belt of a drive of the steering pump
|
Characteristic |
Value |
|
Size of a deflection of a belt at effort of 10 kgfs, mm |
|
|
8.9 — 9.9 |
- The belt which was in the use
|
10.9 — 13.0 |
Steering drive See. Check of a condition of steering drafts.
|
Characteristic |
Value |
|
Dimensional characteristics, mm |
|
|
200.0 |
- Point of measurement of effort of resistance to lateral deviations (I)
|
240.0 |
- Size axial люфтов (C), mm
|
|
|
0.3 |
|
|
0.1 |
|
Torque of axial rotation of a spherical finger of an external tip (In), Nanometer
|
0.3 — 2.9 |
|
Resistance to lateral deviations (And), kgf |
- Draft (in a point of measurement of I)
|
0.39 — 3.24 |
|
|
0.49 — 4.71 |
Reechny steering mechanism
|
Characteristic |
Value |
|
Effort of sliding of a lath *, kgf
|
14 — 26 |
|
Course of a lath, mm
|
72.1 |
|
Effort of a provorachivaniye of a leading gear wheel, Nanometer
|
|
|
Average value
|
0.8 — 1.5 |
|
The maximum difference of a torque at a provorachivaniye from an emphasis against the stop
|
0.6 |
|
|
* It is measured at normal hydraulic pressure in GUR path at a pulling of steering draft from the neutral provision of a lath on size of 11.11 mm with speed of 3.17 mm/pages. |
Hydrostrengthening system
|
Characteristic |
Value |
|
Pressure in a hydraulic path, kgf/cm 2
|
88 — 94 |
Steering column See. Removal, check of a condition and installation of a steering column.
|
Characteristic |
Value |
|
Geometrical characteristics, mm |
- Length of the top shaft (L1)
|
700.3 — 704.3 |
- Length of the bottom shaft (L2)
|
178.0 — 180.0 |
- Length of the top kardanny hinge (L3)
|
430.8 — 432.8 |
|
Geometrical characteristics of the driving mechanism of adjustment of an inclination of a column, mm |
|
|
21.0 |
|
|
9.0 |
Corners of installation of wheels
|
Characteristic |
Value |
|
Disorder, hail |
|
|
- 0.58 — 0.92 |
|
Corner of a longitudinal inclination of an axis of turn of a wheel (выбег), hail |
|
|
2.25 — 3.75 |
|
Convergence, hail |
|
|
0.08 — 0.24 |
|
Convergence, mm |
|
|
1.0 — 3.0 |
|
Divergence corner at turn of wheels on 20 °, a hail |
|
|
|
|
30 — 34 |
|
|
28 — 32 |
|
Corner of a cross-section inclination of an axis of turn of a wheel, hail |
|
|
14.33 ± 0.75 |
Efforts of a tightening of carving connections, Nanometer
|
Connection type |
Value |
|
Nuts of fastening of wheels
|
118 — 146 |
Forward suspension bracket
|
Connection type |
Value |
|
Bolts of fastening of supports of brake mechanisms to a rotary fist
|
72 — 98 |
|
Bolts of fastening of naves of free rotation to stupichny assemblies
|
24 — 34 |
|
Bolts of fastening of brake disks to stupichny assemblies
|
49 — 69 |
|
Nuts of fastening of spherical support to rotary fists
|
118 — 167 |
|
Bolts of fastening of spherical support to cross-section levers of a suspension bracket
|
103 — 127 |
|
Bolts of fastening of basic arms of the stabilizer of cross-section stability
|
62 — 88 |
|
Nuts of fastening of racks of the stabilizer of cross-section stability
|
83 — 103 |
|
Nuts of piston rods of shock-absorbers
|
58 — 79 |
|
Nuts of fastening of the top support of racks of a suspension bracket
|
39 — 54 |
|
Nuts of bolts of fastening of the bottom support of racks of a suspension bracket to rotary fists
|
151 — 165 |
|
Bufera of a course of compression of racks
|
21 — 26 |
|
Fastening nuts to rotary fists of tips of steering drafts
|
64 — 108 |
|
Nuts of fastening of cross-section levers of a suspension bracket to a car body
|
94 — 103 |
Back suspension bracket
|
Connection type |
Value |
|
Nuts of fastening of the bottom levers
|
140 — 157 |
|
Nuts of fastening of the top levers
|
140 — 157 |
|
Bolts of fastening of the right end of a jet bar to an arm of the back bridge
|
108 — 127 |
|
Bolts of fastening of the left end of a jet bar to a frame
|
140 — 157 |
|
Bolts / nut of fastening of the bottom support of shock-absorbers
|
67 — 88 |
|
Nuts of fastening of the top support of shock-absorbers
|
59 — 78 |
|
Bolts of collars / plugs of fastening shock-absorber hoses
|
25 — 32 |
|
Bolts of fastening of racks of the stabilizer of cross-section stability to a frame
|
25 — 32 |
|
Nuts of fastening of racks of the stabilizer of cross-section stability to an arm
|
25 — 32 |
|
Nuts of fastening of racks of the stabilizer of cross-section stability to a stabilizer bar
|
41 — 47 |
Steering
Steering pump
|
Connection type |
Value |
|
Bolts of fastening of an arm
|
14 — 18 |
|
Bolt of fastening of the operating valve
|
69 — 78 |
|
Bolt of the shtutserny socket of a hydraulic hose
|
36 — 51 |
|
Nut of fastening of a pulley
|
54 — 68 |
|
Bolts of fastening of a back cover
|
14 — 18 |
|
Bolt of fastening of a soaking-up tube
|
14 — 18 |
Steering mechanism and drive
|
Connection type |
Value |
|
Lock-nut of the adjusting screw of the steering mechanism
|
49 — 69 |
|
Fastening of a face cover of the steering mechanism
|
58 — 73 |
|
Shtutsernye sockets of hydraulic lines
|
10 — 16 |
|
Bolt of fastening of the bottom hinge to a shaft of a leading gear wheel
|
24 — 29 |
|
Bolt of fastening of a back cover of a case
|
20 — 19 |
|
Bolts of fastening of assembly of the steering mechanism
|
118 — 137 |
|
Internal tips of steering drafts
|
118 — 147 |
|
Lock-nuts of tips of steering drafts
|
64 — 108 |
|
Cap nuts of shtutserny connections |
|
|
30 — 25 |
|
|
30 — 35 |
|
Nuts of fastening of tips of steering bent for to rotary fists
|
64 — 69 |
Steering column
|
Connection type |
Value |
|
Bolts of fastening of the module of a safety cushion
|
13 — 25 |
|
Bolt of the flexible hinge
|
23 — 30 |
|
Bolt of the bottom kardanny U-shaped hinge
|
23 — 30 |
|
Lock nut of a shaft of a steering column
|
25 — 34 |
|
Nut of fastening of a steering wheel
|
30 — 39 |
|
Bolts of the top basic arm
|
12 — 18 |
|
Bolt of the top kardanny U-shaped hinge
|
23 — 30 |
|
Nuts of fastening of the panel of a floor / boot
|
9 — 12 |
|
|
