Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
9. Brake system
10. Suspension bracket and steering
10.1. Specifications
10.2. Assessment of the general condition of components of a suspension bracket and car steering
10.3. Check of a condition and replacement of spherical support of a forward suspension bracket
10.4. Check of a condition of steering drafts
10.5. Removal and installation of the cross-section lever of a forward suspension bracket
10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
10.7. Removal, check of a condition and installation of screw springs and rack-mount assemblies of a forward suspension bracket
10.8. Removal and installation of stupichny assembly and rotary fist
10.9. Removal, check of a condition and installation of the forward stabilizer of cross-section stability
10.10. Replacement of stupichny bearings
10.11. Check of a condition of shock-absorbers and springs of a back suspension bracket
10.12. Removal and installation of components and assembly of a back suspension bracket
10.13. Removal, check of a condition and installation of levers of a back suspension bracket
10.14. Removal, check of a condition and installation of screw springs of a back suspension bracket
10.15. Removal and installation of shock-absorbers of a back suspension bracket
10.16. Removal and installation of the back stabilizer of cross-section stability
10.17. Removal, check of a condition and installation of a cross-section jet bar of a back suspension bracket
10.18. Pumping of a hydraulic path of a steering drive
10.19. Checks and adjustments of a steering wheel
10.20. Check of effort of resistance to sliding of a lath of the steering mechanism
10.21. Adjustment of a torque of a provorachivaniye of a leading gear wheel of the steering mechanism
10.22. Check of hydraulic pressure of GUR
10.23. Adjustment of effort of a tension of a belt of a drive of the steering pump
10.24. Removal and installation of reduktorny assembly
10.25. Removal and installation of assembly of the steering mechanism
10.26. Removal and installation of the steering pump
10.27. Removal and installation of a steering wheel
10.28. Removal and installation of assembly of the combined podrulevy switches
10.29. Removal and installation of the lock of ignition / blocking of a steering column
10.30. Removal, check of a condition and installation of a steering column
10.31. Corners of installation of forward wheels
11. Body
12. Electric equipment
 












10-28-snyatie-i-ustanovka-sborki-kombinirovannykh-podrulevykh-pereklyuchatelejj.html

10.28. Removal and installation of assembly of the combined podrulevy switches

Replacement of podrulevy switches can be made in an individual order without removal of assembly of the basis from a steering column.


 PERFORMANCE ORDER

  1. Deaktiviruyte SRS (see. Head Electric equipment).
  2. Remove a steering wheel (see. Removal and installation of a steering wheel).
  3. Disconnect electroconducting from assembly of a spiral cable drum and turn out bolts of fastening of the last to the basis of the combined podrulevy switches.
  4. Remove a cable drum.
  5. Disconnect electroconducting from the combined podrulevy switches.
  1. Turn out screws of fastening of the basis of assembly of podrulevy switches.

If there is a need for removal any one of switches, turn out screws of its fastening to the basis.

  1. Installation is made upside-down.


«on page back
10.27. Removal and installation of a steering wheel
on the following page»
10.29. Removal and installation of the lock of ignition / blocking of a steering column