Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
8.1. 4-step automatic transmission
8.1.1. General information
8.1.2. AT problem diagnostics - the general information
8.1.3. Electronic and hydraulic control system of 4-step AT
8.1.4. Removal and transmission installation
8.1.5. Replacement of an epiploon of lengthening of transmission
8.1.6. Removal and installation of a cooler of ATF
8.1.7. Removal and installation of klapanny assembly of a hydraulic contour of management of AT
8.1.8. Removal, check of a condition and installation of a driving cable of blocking of switchings
8.1.9. Adjustment of a drive of switching of AT
8.1.10. Adjustment of the sensor switch of provisions of AT / permission of start
8.1.11. Major maintenance of AT
8.2. Transfer case
8.3. Differentials, power shafts / semi-axis
8.4. Driveshafts
9. Brake system
10. Suspension bracket and steering
11. Body
12. Electric equipment
 












8-1-9-regulirovka-privoda-pereklyucheniya-at.html

8.1.9. Adjustment of a drive of switching of AT

 PERFORMANCE ORDER

  1. Transfer the selector lever from the situation "R" to situation "1", - pass of each tooth should be defined distinctly to the touch, otherwise, and also in case of failure of the index of position of the lever, make necessary adjustment of a drive.
  1. Return the lever to the situation "R", then release lock-nuts of the coupling coupling.
  1. Having delayed the selector lever towards the situation "R" (without button squeezing), rotation of the coupling coupling try to achieve combination it with the cable core.
  1. Release the coupling on one turn and tighten lock-nuts with demanded effort. (4.4 — 5.9 Nanometer).
  1. Having transferred the selector lever to situation "1", make sure of smoothness of its moving.


«on page back
8.1.8. Removal, check of a condition and installation of a driving cable of blocking of switchings
on the following page»
8.1.10. Adjustment of the sensor switch of provisions of AT / permission of start