Infiniti QX4 service since 1996 of release
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
5. Cooling and heating systems
6. Power supply systems and managements
7. Start and charge systems
8. Transmission line
9. Brake system
10. Suspension bracket and steering
10.1. Specifications
10.2. Assessment of the general condition of components of a suspension bracket and car steering
10.3. Check of a condition and replacement of spherical support of a forward suspension bracket
10.4. Check of a condition of steering drafts
10.5. Removal and installation of the cross-section lever of a forward suspension bracket
10.6. Adjustment of a pretightness of stupichny bearings of forward wheels
10.7. Removal, check of a condition and installation of screw springs and rack-mount assemblies of a forward suspension bracket
10.8. Removal and installation of stupichny assembly and rotary fist
10.9. Removal, check of a condition and installation of the forward stabilizer of cross-section stability
10.10. Replacement of stupichny bearings
10.11. Check of a condition of shock-absorbers and springs of a back suspension bracket
10.12. Removal and installation of components and assembly of a back suspension bracket
10.13. Removal, check of a condition and installation of levers of a back suspension bracket
10.14. Removal, check of a condition and installation of screw springs of a back suspension bracket
10.15. Removal and installation of shock-absorbers of a back suspension bracket
10.16. Removal and installation of the back stabilizer of cross-section stability
10.17. Removal, check of a condition and installation of a cross-section jet bar of a back suspension bracket
10.18. Pumping of a hydraulic path of a steering drive
10.19. Checks and adjustments of a steering wheel
10.20. Check of effort of resistance to sliding of a lath of the steering mechanism
10.21. Adjustment of a torque of a provorachivaniye of a leading gear wheel of the steering mechanism
10.22. Check of hydraulic pressure of GUR
10.23. Adjustment of effort of a tension of a belt of a drive of the steering pump
10.24. Removal and installation of reduktorny assembly
10.25. Removal and installation of assembly of the steering mechanism
10.26. Removal and installation of the steering pump
10.27. Removal and installation of a steering wheel
10.28. Removal and installation of assembly of the combined podrulevy switches
10.29. Removal and installation of the lock of ignition / blocking of a steering column
10.30. Removal, check of a condition and installation of a steering column
10.31. Corners of installation of forward wheels
11. Body
12. Electric equipment
 








8099f600






10-3-proverka-sostoyaniya-i-zamena-sharovykh-opor-perednejj-podveski.html

10.3. Check of a condition and replacement of spherical support of a forward suspension bracket


Check of a condition of a spherical support

And — the Deviation of a shaft of a spherical finger
In — Axial rotation of a shaft

With — Axial люфт a spherical support


 PERFORMANCE ORDER

  1. Liberate a spherical support from a rotary fist and by means of a dynamometer of bezmenny type measure resistance of assembly to a deviation in the plane of an axis of a spherical finger (see an illustration Check of a condition of a spherical support). If the result of check falls outside the limits an admissible range (0.8 — 7.8 kgfs), replace a support.
  2. With a navernuty nut on the place measure size of a torque of axial rotation of a shaft of a spherical finger (see an illustration Check of a condition of a spherical support) — the nominal rate makes 0.5 — 5.0 Nanometers. In case of need make assembly replacement.
  3. To Poddomkratta the car also establish it on props (see an illustration the Scheme of an institution of props for car fixing in the lifted situation).
  1. Attentively examine protective covers of spherical support on existence of signs of development of leakages of greasing. Check a condition of covers — existence of cracks and cuts is not admissible.
  1. Fix on the cross-section lever of a suspension bracket a tsiferblatny measuring instrument, having rested it a plunzher in bottom edges of a support of the brake mechanism, then, operating with mount as the lever, wring out the lever down from a rotary fist and consider instrument reading. In the presence of a little appreciable axial люфта (see an illustration Check of a condition of a spherical support) the spherical support is subject to replacement.
  1. The faulty spherical support is subject to replacement.


Replacement

 PERFORMANCE ORDER

  1. To Poddomkratta a car front also establish it on props (see an illustration the Scheme of an institution of props for car fixing in the lifted situation).
  2. Liberate from stupichny assembly a power shaft.
  3. Liberate from a rotary fist a finger of a spherical support.
  4. Remove a spherical support from the cross-section lever of a suspension bracket.
  5. Installation of components is made as it should be, the return to an order of their dismantle. Track, that all fixture was tightened with demanded effort.


«on page back
10.2. Assessment of the general condition of components of a suspension bracket and car steering
on the following page»
10.4. Check of a condition of steering drafts